Kayayyaki
Mai hana guntu RFTXXN-10CA5025C-3 Mai hana guntu DC ~ 3.0GHz Mai hana RF
| Samfuri | RFTXXN-10CA5025C-3 (XX= ƙimar ragewa) |
| Nisa tsakanin juriya | 50 Ω |
| Mita Tsakanin Mita | DC~3.0GHz |
| VSWR | matsakaicin 1.25 |
| Ƙarfi | 10 W |
| Ƙimar Ragewa (dB) | 01-10dB/11-20dB/21-30dB |
| Juriyar Ragewa (dB) | ±0.6dB/±0.8dB/±1.0dB |
| Ma'aunin Zafin Jiki | <150ppm/℃ |
| Kayan Substrate | AlN |
| Fasaha Mai Juriya | Fim Mai Kauri |
| Zafin Aiki | -55 zuwa +150°C (Duba ƙimar rage wutar lantarki) |
Aiki na yau da kullun:
2dB Jadawali
20dB Jadawali
6dB Jadawali
30dB Jadawali
Hanyar shigarwa
Rage Ƙimar Wutar Lantarki
Lokacin sake yin solder da zane mai zafin jiki
Naɗin P/N
Sanarwa
■ Bayan lokacin ajiya na sabbin kayan da aka saya ya wuce watanni 6, ya kamata a kula da yadda za a iya haɗa su kafin amfani. Ana ba da shawarar a adana a cikin marufi mai injin tsotsewa.
■ A haƙa ramin zafi a kan PCB ɗin sannan a cika abin da aka solder ɗin.
■ Ana fifita walda mai sake yin amfani da shi don walda ta ƙasa, don Allah a duba gabatarwar Reflow
■ Domin cika buƙatun zane-zanen, dole ne a sanya na'urar radiator mai girman da ya isa.
■ A ƙara sanyaya iska ko sanyaya ruwa idan ya cancanta.
◆ Umarni:
■ Ana samun na'urorin rage RF na musamman, masu hana RF da kuma tashoshin RF.
■ Domin cika buƙatun zane, ya zama dole a sanya radiator mai girma sosai. Ana buƙatar a shafa saman ƙarfe da radiators da sirara mai mai zafi.
■ A ƙara sanyaya iska ko sanyaya ruwa idan ya cancanta.
